Home
Micro-mechanical Voltage Tunable Fabry-perot Filters Formed In (111) Silicon by James D Patterson, Paperback | Indigo Chapters
Loading Inventory...
Coles
Micro-mechanical Voltage Tunable Fabry-perot Filters Formed In (111) Silicon by James D Patterson, Paperback | Indigo Chapters
From James D Patterson
Current price: $60.51
![Micro-mechanical Voltage Tunable Fabry-perot Filters Formed In (111) Silicon by James D Patterson, Paperback | Indigo Chapters](https://dynamic.indigoimages.ca/books/9781288916313.jpg?scaleup=true&width=600&quality=85&lang=en)
![Micro-mechanical Voltage Tunable Fabry-perot Filters Formed In (111) Silicon by James D Patterson, Paperback | Indigo Chapters](https://dynamic.indigoimages.ca/books/9781288916313.jpg?scaleup=true&width=600&quality=85&lang=en)
Coles
Micro-mechanical Voltage Tunable Fabry-perot Filters Formed In (111) Silicon by James D Patterson, Paperback | Indigo Chapters
From James D Patterson
Current price: $60.51
Loading Inventory...
Size: 0.23 x 9.69 x 0.47
*Product information may vary - to confirm product availability, pricing, shipping and return information please contact Coles
The MEMS (Micro-Electro-Mechanical-Systems) technology is quickly evolving as a viable means to combine micro-mechanical and micro-optical elements on the same chip. One MEMS technology that has recently gained attention by the research community is the micro-mechanical Fabry-Perot optical filter. A MEMS based Fabry-Perot consists of a vertically integrated structure composed of two mirrors separated by an air gap. Wavelength tuning is achieved by applying a bias between the two mirrors resulting in an attractive electrostatic force which pulls the mirrors closer. In this work, we present a new micro-mechanical Fabry-Perot structure which is simple to fabricate and is integratable with low cost silicon photodetectors and transistors. The structure consists of a movable gold coated oxide cantilever for the top mirror and a stationary Au/Ni plated silicon bottom mirror. The fabrication process is single mask level, self aligned, and requires only one grown or deposited layer. Undercutting of the oxide cantilever is carried out by a combination of RIE and anisotropic KOH etching of the (111) silicon substrate. Metallization of the mirrors is provided by thermal evaporation and electroplating. The optical and electrical characteristics of the fabricated devices were studied and show promissing results. A wavelength shift of 120nm with 53V applied bias was demonstrated by one device geometry using 6.27 micrometer air gap. The finesse of the structure was 2.4. Modulation bandwidths ranging from 91KHz to greater than 920KHz were also observed. Theoretical calculations show that if mirror reflectivity, smoothness, and parallelism are improved, a finesse of 30 is attainable. The predictions also suggest that a reduction of the air gap to 1 micrometer results in an increased wavelength tuning range of 175 nm with a CMOS compatible 4.75V. | Micro-mechanical Voltage Tunable Fabry-perot Filters Formed In (111) Silicon by James D Patterson, Paperback | Indigo Chapters